Speco Technologies SIPSD37X - Manual (Page 29)

37X Speed Dome Camera 29/50
Camera Setup
ZOOM CAMERA SETUP
------------------------
FOCUS MODE SEMIAUTO
DIGITAL ZOOM ON
IMAGE FLIP OFF
SHARPNESS 16
STABILIZATION OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
BACK
EXIT
Sets the general functions of zoom camera module.
z
Focus Mode [AUTO/MANUAL/SEMIAUTO]
Sets camera Focus mode.
{
SEMIAUTO Mode
This mode automatically exchanges focus
modes between Manual Focus mode and
Auto Focus mode by operation. Manual
Focus mode activates in preset operation
and Auto Focus mode activates during
jog operation. With Manual mode at
presets, Focus data is memorized in each
preset in advance and the camera calls
focus data in correspondence with
presets as soon as camera arrives at
presets. It should shorten time to get
focuses . Focus mode automatically
changes to Auto Focus mode when jog
operation starts.
z Digital Zoom [ON/OFF]
Sets the digital zoom functions to
ON/OFF. If this is set to OFF, the optical
zoom function runs but the zoom function
stops at the end of optical zoom
magnification.
z Image Flip [ON/OFF]
Sets System Image Flip Function to
ON/OFF. When this function is set to ON,
flipped images always come out. When
the camera is installed as Desktop type,
set to ON to get proper images.
z Sharpness [0-32] or [0~31]
Sets image sharpness to enhance
pictures.
OSD MENU 4