Sierra INNOVA 215 User Manual
Page 18
IM-215 Rev-A.1 Series Innova-Switch™ Page 18 of 42
The electronic assemblies contained in the Innova Switch™ are configured for specific voltages and have specific
modifications to accommodate the various agency approvals. When ordering spare electronics, replacements, or
exchanges in the field please ensure you identify the specific configuration you have by noting the boxes marked
on the transformer configuration tag and the serial number.
mounting wings or bracket provided. Connect the switch wiring between the Innova-
Switch
™
Switch remote electronics as shown in Figure 7.0. Connect power wiring
and alarm relay wiring to the remote enclosure as shown in Figure 7.0. Upon
completion of wiring reinstall the Innova-Switch™ electronics and secure with the
captive screws.
*IMPORTANT*
BE SURE TO APPLY THE PROPER VOLTAGE AS CONFIGURED
AT THE FACTORY. DO NOT APPLY 115 VAC TO 24 VDC
VERSIONS OR 24 VDC TO 115 VAC VERSIONS (LIKEWISE 230
VAC).
SPECIAL NOTICE