Sierra INNOVA 215 - Manual (Page 3)

IM-215 Rev-A.1 Series Innova-Switch™ Page 3 of 42
The electronic assemblies contained in the Innova-Switch
™ models are configured for specific
voltages and have specific modifications to accommodate the various agency approvals. When
ordering spare electronics, replacements, or exchanges in the field please ensure you identify the
specific configuration you have by noting the boxes marked on the transformer configuration tag.
NOTICE
This manual covers the following model numbers:
Innova-Switch™ Series Models 215 - FS4200 215 - LS3200
Agency Approvals
Explosion-Proof rating
Mass Flow Switch Point Level Switch
CENELEC
European
EEX d IIB T4 (Killark Enclosure)
EEx d IIC T4 (Akron Electric
Enclosure)
See Figure 1A and 1B FS42CN LS32CN
CSA
Canadian Standards
T4A
Class I, Group B,C,D
Class II, Group E, F, G
(Both Akron Electric and Killark)
FS42CS LS32CS
Non-Approved
Non-Explosion Proof
FS42NX LS32NX
(Ref. Section CE 3.2.3
wiring)
EMC Directive: 89/336/EEC
Option-CE Option-CE
SPECIAL NOTICE