Before operation (continued) - dvd part, Prep ara tion, Sound – Sanyo HV-DX1E User Manual

Page 19: Others, Digital audio output, Sample frequency, Dynamic range control (drc), Vocal, Set playback control (pbc) to on or off

Advertising
background image

PREP

ARA

TION

19

Before Operation (Continued) - DVD part

Sound

Digital Audio Output

Each DVD disc has a variety of audio output options.
Set the DVD+VCR’s Digital Audio Output according to
the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM”
if you connected the DVD+VCR’s DIGITAL AUDIO OUT
jack to a Dolby Digital decoder (or an amplifier or other
equipment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected
the DVD+VCR’s DIGITAL AUDIO OUT jack to an
amplifier or other equipment with a DTS decoder, Dolby
Digital decoder or MPEG decoder.
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD+VCR output sounds in the
PCM 2ch format when you play a DVD video disc
recorded with a Dolby Digital, MPEG1, or MPEG2
recording system.

Sample Frequency

To change the Sample Frequency setting, first select
the desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.

Others

The DRC, Vocal and PBC settings can be changed.

Press 3

3/4

4 to select the desired item and press

SELECT/OK. The setting of the selected item is
changed between On and Off.

Dynamic Range Control (DRC)

With the DVD format, you can hear a programme’s
soundtrack in the most accurate and realistic presenta-
tion possible, thanks to digital audio technology.
However, you may wish to compress the dynamic range
of the audio output (the difference between the loudest
sounds and the quietest ones). Then, you may listen to
a movie at a lower volume without losing clarity of
sound. Set DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into a normal stereo sound.

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio

CDs.

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Digital Audio Output

Others

Disc Audio

DRC Off

PBC On

Vocal On

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

DOLBY
DIGITAL

/PCM

Stream/PCM

PCM

Sample Freq.

48KHz

96KHz

Advertising