Troubleshooting - dvd part, Reference – Sanyo HV-DX1E User Manual

Page 35

Advertising
background image

35

REFERENCE

Troubleshooting - DVD part

Check the following guide for the possible cause of a problem before contacting service.

Symptom

DVD or VCR do not
work properly.

No power.

The power is on, but the
DVD player does not
work.

No picture.

No sound.

The picture is poor.

The DVD player does
not start playback.

The remote control
does not work properly.

Cause

DVD or VCR button is not switched
properly.

The mains lead is disconnected.

No disc is inserted.

The TV is not set to receive DVD signal
output.

The video cable is not connected
securely.

The equipment connected with the
audio cable is not set to receive DVD
signal output.

The audio cables are not connected
securely.

The power of the equipment connected
with the audio cable is turned off.

The Digital Audio Output is set to the
wrong position.

The disc is dirty.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the guide.

The disc is dirty.

The Rating level is set.

There is an obstacle in the path of the
remote control and this unit.

The batteries in the remote control are
exhausted.

Correction

Refer to page 8.

Plug the mains lead into the wall outlet
securely.

Insert a disc. (Check that the DVD, VCD
or, audio CD indicator in the display
window is lit.)

Select the appropriate video input mode
on the TV so the picture from the
DVD+VCR appears on the TV screen.

Connect the video cable into the jacks
securely.

Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD+VCR.

Connect the audio cable into the jacks
securely.

Turn on the equipment connected with
the audio cable.

Set the Digital Audio Output to the
correct position, then turn on the
DVD+VCR again by pressing .

Clean the disc.

Insert a playable disc. (Check the disc

type, colour system and Regional code.)

Place the disc with the playback side
down.

Place the disc on the disc tray correctly
inside the guide.

Clean the disc.

Cancel the Rating function or change
the rating level.

Remove the obstacle.

Replace the batteries with new ones.

Advertising