Sanyo HV-DX1E - Manual (Page 8)

8
Remote Control
DVD/VCR select button
Select the output source (DVD or VCR) to
view on the TV screen.
Switches DVD+VCR ON and OFF.
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
DISPLAY, CLK/CNT
Accesses On-Screen display.
Switches among the clock, tape counter
and tape remaining modes on the display.
b / B / v / V (left/right/up/down)
- Selects an option in the menu
- CH/TRK (v/V): Selects channel of VCR.
Adjusts manually the tape’s picture on
screen.
SETUP/i
Accesses or removes DVD setup menu
and VCR menu.
TITLE
Displays the disc’s Title menu, if
available.
PAUSE/STEP (X X)
Pause playback or recording
temporarily / press repeatedly for frame-
by-frame playback.
STOP (x x)
Stops playback.
REC (z z)
Records normally or activates Instant
Timer Recording.
0-9 numerical buttons
Selects numbered options in a menu.
AUDIO
Selects an audio language (DVD) or an
audio channel (CD).
SUBTITLE
Selects a subtitle language.
MARKER
Marks any point during playback.
SEARCH
Displays MARKER SEARCH menu.
REPEAT
Repeat chapter, track, title, all.
RANDOM, CM-CUT
- Plays tracks in random order.
- Fast forwards picture search through
30 seconds of recording.
VIDEO Plus+
To display the programme menu for
VIDEO Plus+ System programming
A-B, SP/LP
- Repeats sequence.
- Selects recording speed
OPEN/CLOSE, EJECT (Z Z)
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
OUTPUT SELECT
Cycles through the 3 main output views:
DVD, Tuner and VCR.
SELECT/OK
- Acknowledges menu selection.
- Displays functions on the TV screen.
DISC MENU
Accesses menu on a DVD disc.
AV
To select the VCR deck’s source (Tuner,
AV1, AV2 or AV3).
FORWARD (> >)
DVD; Search forward*/ go to next chap-
ter or track.
VCR; Advances the tape during the
STOP mode or for fast forward picture
search.
PLAY (H H)
Starts playback.
BACKWARD (. .)
DVD; Search backward*/ go to begin-
ning of current chapter or track or go to
previous chapter or track.
VCR; Rewinds the tape during the
STOP mode or for fast reverse picture
search.
* Press and hold button for about two
seconds.
PROGRAM
Accesses or removes Programme menu.
CLEAR
Removes a track number on the
programme menu or a mark on the
MARKER SEARCH menu.
LOCK
Switch the Lock function on and off.
ANGLE
Selects a DVD camera angle if
available.
RETURN
Removes the setup menu.
ZOOM
Enlarges DVD video image.
Note
This remote control uses the same buttons for VCR and DVD
functions (ex. PLAY).
When using a VCR, first press the VCR button.
When using a DVD, first press the DVD button.