Sanyo HV-DX1E - Manual (Page 25)

Operation with tape
If Timer record events Overlap...
Do not overlap programmes, since overlapping portions
of the conflicting programmes will not be recorded.
Earlier recording times have priority over later recording
times as shown in the diagram.
Example:
Programme 1 will be recorded in its entirety, but only
the last 30 minutes of Programme 2 will be recorded.
Change (Deleting) the Timer Programme
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so with-
out having to enter all the timer event information again.
Simply display the timer event screen. Press
D or E to
select the event that you wish to delete or change.
Press
F to delete the event...or
Press OK to change; then press F or G to select;
Station, Date, Start and End times, PDC and LP. Press
D or E to enter the correct information.
OPERA
TION
25
16:00
16:30
17:00
17:30
PROGRAMME 1
PROGRAMME 2
(This portion will not be recorded.)
If two programmed timer recordings overlap at midnight
00:00 a.m., programme 2 will not be recorded.
The Programme Delivery Control (PDC)
The Programme Delivery Control (PDC) adjusts the
start and end times of a timer record event. This can be
particularly useful with sports events which may run
over into extra time. The PDC signal is
transmitted by the broadcaster and this controls your
video recorder’s timer.
Currently only a limited number of TV companies trans-
mit PDC signals.
Please make sure that when recording from chan-
nels that do not broadcast PDC that you turn PDC
OFF.