Standard Horizon QUANTUM GX2360S - Manual (Page 41)

Page 41 GX2360S
[CALL/SET(MENU)] key to move to the next space.
This method can also be used to enter a blank space
in the name. To clear the previous letter, press the
[H/L(NAV)] key.
9. After the eleventh letter or space has been entered, press the [CALL/
SET(MENU)] key to advance to the MMSI (Maritime Mobile Service Iden-
tity Number) number entry.
10. Turn the CHANNEL selector knob to scroll through numbers, 0-9. To enter
the desired number and move one space to the right press the
[CALL/SET(MENU)] key. Repeat this procedure until all nine space of the
MMSI number are entered.
11. If a mistake was made entering in the name or the MMSI number repeat
pressing the [CALL/SET(MENU)] key until the wrong character is selected,
then move the channel knob to correct the entry.
12. To store the data entered, press and hold
the [CALL/SET(MENU)] key.
13. To enter another individual address, repeat steps 4
through 12.
14. To exit this menu and return to radio operation mode press the [16/9] key.
NOTE
Selecting “NEXT” or “EXIT” will automatically save the name and MMSI
number into memory.
7.7.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
1. Press and hold down the [CALL/SET(MENU)] key
until “RADIO SETUP” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
SETUP” menu.
3. Press the [CALL/SET(MENU)] key, then select
“INDIV REPLY” with the CHANNEL selector knob.
4. Press the [CALL/SET(MENU)]key.
5. Turn the CHANNEL selector knob to select “AUTO”
or “MANUAL.”
6. Press the [CALL/SET(MENU)] key to store the se-