Standard Horizon QUANTUM GX2360S - Manual (Page 54)

GX2360S Page 54
8.7 CHANNEL NAMING
This selection allows you to customize the name of a channel from the default
name.
1. Press and hold down the [CALL/SET(MENU)] key
until “RADIO SETUP” menu appears.
2. Press the [CALL/SET(MENU)] key, then select “CH
NAME” in the “RADIO SETUP” menu with the
CHANNEL selector knob.
3. Press the [CALL/SET(MENU)] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be named and press the [CALL/SET(MENU)]
key.
5. Turn the CHANNEL selector knob scroll through the
alphabet and 0 - 9.
6. Press the [CALL/SET(MENU)] key to enter the de-
sired letter and move the cursor one space to the
right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
do not use all twelve character, press the
[CALL/SET(MENU)] key to move to the next space.
To clear the previous letter, press the [H/L(NAV)]
key.
8. Press and hold down the [CALL/SET(MENU)] key to enter the name and
exit from the “CH NAME” menu. The LCD will return to the “SETUP” menu.
9. If you want to enter the name of another channel, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [16/9] key.