Standard Horizon QUANTUM GX2360S - Manual (Page 60)

GX2360S Page 60
9.3 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section 7 “DSC/
RADIO SETUP” for details). However, the LAMP, CONTRAST, and KEY BEEP
menu item which is accessed from the RAM+ only controls the RAM+’s display
and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL/SET] key until “RADIO SETUP” menu
appears.
2. Press the [ ]/[ ] key to select “RADIO SET” or “DSC SETUP” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work on
by pressing the [ ]/[ ] key.
4. Press the [CALL/SET] key.
5. Press the [
]/[ ] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [ ]/[ ] key to select “EXIT,” then press the [CALL/SET] key to
return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu