10 maintenance, 1 replacement parts – Standard Horizon QUANTUM GX2360S User Manual

Page 61

Advertising
background image

Page 61

GX2360S

10 MAINTENANCE

The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will
prevent damage to the transceiver.

Keep the microphone connected or the jack covered at all times to prevent
corrosion of electrical contacts;

Never key the microphone unless an antenna or suitable dummy load is
connected to the transceiver.

Ensure that the supply voltage to the transceiver does not exceed 16 VDC
or fall below 11 VDC.

Use only STANDARD HORIZON-approved accessories and replacement
parts.

In the unlikely event of serious problems, please contact your Dealer or our
repair facility. Address and phone numbers for this facility, as well as warranty
information, are contained in section 12 WARRANTY.

10.1 REPLACEMENT PARTS

Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:

Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone (714) 827-7600

Commonly requested parts, and their part numbers are listed below.

• Power Cord: T9023306
• VOL/SQL Knob: RA0542600
• Rotary Channel Knob: RA0542500
• Mounting Bracket: RA0544200
• Mounting Bracket Knob: RA045910A
• Microphone Hanger: RA0458800
• Microphone Assembly: M3090118
• RAM+ Mic Routing Cable Assembly: S8101512

Advertising