Sunrise Medical Quickie P300 User Manual
Page 29
29
930317 Rev. C
I X .
S E T - U P ,
A D J U S T M E N T & U S E
B. FOOTRESTS
1. Installation
a) Place swing-away pivot plate (A) onto
the locating pin (B) on top of the caster
housing with the footrest facing out-
ward from frame.
b) Rotate the footrest inward until
latch plate (C ) locks into place on
locking bolt.
Note:
The swing-away hanger utilizes a two
stage latch.The first stage locates the locking
bolt.The second stage engages the latch.THE
LATCH PLATE MUST BE SECURELY LOCKED
INTO PLACE BEFORE OPERATING
WHEELCHAIR.
2. Removal
a) To remove footrest, press quick-
release button ( D).
b) Rotate footrest outward and lift.
3. Height Adjustment
a) Remove the retaining bolt (E) in the
hanger frame tube.
b) Reposition footrest height.
c) Re-tighten bolt.
C. ELEVATING LEGREST
(OPTIONAL)
1. Installation
To install or remove Elevating Legrest
(ELR) see instructions for Swing-away
Footrest installation page 29.
2. Adjustment
a) To raise legrest, lift to desired position.
Legrest will automatically lock in place.
b) To lower legrest, while seated in chair,
first lift slightly, then press release lever
(A) down and lower legrest to desired
position. Legrest will automatically lock
in place.
D
E
A
A
B
C