Smart Technologies 2011 - Manual (Page 85)

Clicker button Description
Enter Make or confirm a selection.
Ask Question Displays the clicker ID.
Menu Press with the Power button to open the clicker menu in Teacher mode.
See Using the Teacher mode menu below.
Answer Five colored buttons with geometric shapes to answer questions.
Using the Teacher mode menu
g To put SMART Response LE clickers into Teacher mode
Press the Power and Home buttons simultaneously.
N
N O T E
You can press the Home button by itself without any effect.
Press the Enter button to make your selections. Press the Home button to return to the primary
menu.
The following options are available in the Teacher mode menu:
Option Description
Scan & Pick Pair the clicker with your receiver during setup.
Show Rcv PID Display the current Pan ID.
Clicker ID Set the Clicker ID.
Contrast Lightens or darkens the clicker’s LCD display. Use the up
and down arrows to increase or decrease the contrast.
Device Info Display the clicker’s MAC address and firmware version.
Restore Default Restore the clicker’s factory default settings.
Exit Exit Teacher mode to connect to the class.
C H A P T E R 3
Using SMART Response software
79