Table 11. lookup table read instruction – ST & T UPSD3212C User Manual

Page 22

Advertising
background image

uPSD3212A, uPSD3212C, uPSD3212CV

22/163

External RAM. Table

10

shows a list of the Data

Transfer instructions that access external Data
Memory. Only indirect addressing can be used.
The choice is whether to use a one-byte address,
@Ri, where Ri can be either R0 or R1 of the se-
lected register bank, or a two-byte
address, @DTPR.
Note: In all external Data RAM accesses, the Ac-
cumulator is always either the destination or
source of the data.

Lookup Tables. Table

11

shows the two instruc-

tions that are available for reading lookup tables in
Program Memory. Since these instructions access
only Program Memory, the lookup tables can only
be read, not updated.
The mnemonic is MOVC for “move constant.” The
first MOVC instruction in Table

11

can accommo-

date a table of up to 256 entries numbered 0
through 255. The number of the desired entry is
loaded into the Accumulator, and the Data Pointer
is set up to point to the beginning of the table.
Then:

MOVC A, @A+DPTR

copies the desired table entry into the Accumula-
tor.

The other MOVC instruction works the same way,
except the Program Counter (PC) is used as the
table base, and the table is accessed through a
subroutine. First the number of the desired en-try
is loaded into the Accumulator, and the subroutine
is called:

MOV A , ENTRY NUMBER
CALL TABLE

The subroutine “TABLE” would look like this:

TABLE: MOVC A , @A+PC
RET

The table itself immediately follows the RET (re-
turn) instruction is Program Memory. This type of
table can have up to 255 entries, numbered 1
through 255. Number 0 cannot be used, because
at the time the MOVC instruction is executed, the
PC contains the address of the RET instruction.
An entry numbered 0 would be the RET opcode it-
self.

Table 10. Data Transfer Instruction that Access External Data Memory Space

Table 11. Lookup Table READ Instruction

Address Width

Mnemonic

Operation

8 bits

MOVX A,@Ri

READ external RAM @Ri

8 bits

MOVX @Ri,A

WRITE external RAM @Ri

16 bits

MOVX A,@DPTR

READ external RAM @DPTR

16 bits

MOVX @DPTR,a

WRITE external RAM @DPTR

Mnemonic

Operation

MOVC A,@A+DPTR

READ program memory at (A+DPTR)

MOVC A,@A+PC

READ program memory at (A+PC)

Advertising
This manual is related to the following products: