Sony RM-AV2000 - Manual (Page 11)

11
Example: To play a CD player
1
Press the desired Component
Select button.
The Commander comes on and the
keys for operating the selected
component are displayed.
Operating Your
Components with the
Remote Commander
When you operate a non-Sony
component, make sure you set the
component code first (page 8).
CD
Continued
2
Press the desired key in the touch
key display.
When the remote control signal is
sent,
is displayed on the display.
You may also use the VOLUME +/–
buttons, the MUTING button and the
CHANNEL +/– buttons if necessary.
3
When you are done using the
Commander, press
COMMANDER OFF to power off
the Commander.
Note
The remote control signals may be different for
some components or functions. In this case,
program the remote control signals with the
learning function (see page 13). Note, however,
that components and functions that do not
support the remote control of infrared signals
will not work with this Commander.
To control the volume
Press the VOLUME +/– buttons to
control the volume, and the MUTING
button to mute. When you select a visual
component, the TV’s volume will be
controlled, and when you select an audio
component, the amplifier’s volume will
be controlled. You can change this setting
also (page 18).
COMMANDER
OFF
SYSTEM CONTROL COMMANDER
OFF LIGHT
TV VCR1 VCR2 VCR3 DVD DBS/CBL
AMP CD MD/DAT DECK B/A TUNER OPTION
CHANNEL VOLUME
MUTING
–
+
–
+
≠
±
1 2 3
2
1
CD
1 2 3
4 5 6
7 8
+10 0
9
ENTER
D.SKIP
SHUFFLE REPEAT
CONTINUE
CLEAR
POWER
PGM
CD
1 2 3
4 5 6
7 8
+10
0
9
ENTER
D.SKIP
SHUFFLE REPEAT
CONTINUE
CLEAR
POWER
PGM