Sony RM-AV2000 - Manual (Page 27)

27
SYSTEM CONTROL COMMANDER
OFF LIGHT
TV VCR1 VCR2 VCR3 DVD DBS/CBL
AMP CD MD/DAT DECK B/A TUNER OPTION
CHANNEL VOLUME
MUTING
–
+
–
+
≠
±
1 2 3
3
1
2
Assigning Other
Components to the
Component Select
Buttons
In addition to using the OPTION button
as an extra Component Select button,
assign another component to any
Component Select button. For example, if
you have two VCRs and two CD players,
you can use the VCR3 button as the
Component Select button for your
second CD player.
Note
Once you assign another component to a
Component Select button, the setting of the
component code number will be erased. The
component code number will not return even if
you reset the newly assigned component and
turn back to the original component.
Example: To assign a CD player
to the VCR3 button
1
While pressing COMMANDER
OFF, press VCR3.
The keys for that component (VCR3)
flash.
2
While pressing VCR3, press CD.
The Commander beeps and the keys
for the new component (CD) flash.
The new component name (CD) flash
and the original component name
(VCR3) stays lit.
When you assign a cassette deck
(DECK B/A) on another Component
Select button
You cannot assign both decks A and B at a
time to one button.
If the desired deck (A or B) is not displayed,
finish the procedure by pressing
COMMANDER OFF and press DECK B/A
to select the desired deck, and then start
over from Step 1.
+
COMMANDER
OFF VCR3
+ VCR3 CD
LEARN NG
C+C- V+ V-
MU
VCR 3
RESET
1 2 3
4 5 6
7 8
0
9
ENTER
TV/VIDEO
ANT SW
DISPLAY
POWER
PGM
REC
LEARN NG
C+C- V+ V-
MU
VCR 3
CD
RESET
1 2 3
4 5 6
7 8
+10
0
9
ENTER
D.SKIP
SHUFFLE REPEAT
CONTINUE
CLEAR
POWER
PGM
Continued