Sony RM-AV2000 - Manual (Page 17)

17
SYSTEM CONTROL COMMANDER
OFF LIGHT
TV VCR1 VCR2 VCR3 DVD DBS/CBL
AMP CD MD/DAT DECK B/A TUNER OPTION
CHANNEL VOLUME
MUTING
–
+
–
+
≠
±
1 2 3
1
3
2
LEARN NG
C+C- V+ V-
MU
CD
RESET
1 2 3
4 5 6
7 8
+10 0
9
ENTER
D.SKIP
SHUFFLE REPEAT
CONTINUE
CLEAR
POWER
PGM
Example: To assign a CD player
(CD) to the OPTION button
1
While pressing COMMANDER
OFF, press OPTION.
When a component is already
assigned to OPTION, the component
name and learnable keys flash. To
perform learning, skip to Step 3.
2
While pressing OPTION again,
press the desired Component
Select button.
The Commander beeps, and the
Commander automatically goes into
learning mode (page 12).
When you assign an LD player
(VD) or a cable box (CBL)
Repeat this step again so that the desired
component (“VD” or “CBL”) flashes.
When you assign a cassette deck
(DECK B/A)
You cannot assign both decks A and B to
the OPTION button at a time.
If the desired deck (A or B) is not displayed,
finish the procedure by pressing
COMMANDER OFF and press DECK B/A
to select the desired deck, and then start
over from Step 1.
COMMANDER
OFF
+
OPTION
+
OPTION CD
Using the OPTION
button
You can use the OPTION button as an
extra Component Select button.
For example, if you have two CD players,
you can set the remote control signals of
the second CD player to the OPTION
button to select its key operation.
To use the OPTION button, first assign a
component on it. Then you can either use
it as it is with a Sony component, set a
component code (page 8), or “teach” the
keys and buttons necessary remote
control signals (page 15).
LEARN NG
C+C- V+ V-
MU
CD OP
RESET
1 2 3
4 5 6
7 8
+10 0
9
ENTER
D.SKIP
RETURN
GENRE MODE
SHUFFLE
REPEAT
CONTINUE
CLEAR
DISPLAY
POWER
EXECUTE
ANGLE
PGM
SLEEP
ON/OFF
SUBTITLE
SOUND
FIELD
Continued
LEARN
OP
RESET