Sony RM-AV2000 - Manual (Page 30)

30
3
Press the SYSTEM CONTROL
button you want to teach.
“LEARN” flashes and the display for
the pressed SYSTEM CONTROL
button stays lit.
4
Press and hold down the button
of the remote control until you
hear a beep.
“LEARN” display stops flashing and
stays lit.
If you hear beeps and “NG”
flashes on the display
Learning did not succeed. Try Steps 3 and
4 again.
5
Press COMMANDER OFF.
To clear the learned remote
control signal
1 While pressing COMMANDER OFF,
press VOLUME + and CHANNEL+.
2 While pressing the RESET key, press
SYSTEM CONTROL 1, 2, or 3.
COMMANDER
OFF
Programming a Frequently Used
Key Operation to SYSTEM CONTROL
Buttons (continued)
SYSTEM CONTROL
2
AIR CONDITIONER
ON/OFF
LEARN
SC2
If the ≥ key is not displayed, press any
button before you start.
1
While pressing the ≥ key, press
COMMANDER OFF.
The Commander beeps and “OFF” is
displayed.
To unlock the control
While pressing the “OFF” key, press
COMMANDER OFF. “OFF” disappears
from the display.
SYSTEM CONTROL COMMANDER
OFF LIGHT
TV VCR1 VCR2 VCR3 DVD DBS/CBL
AMP CD MD/DAT DECK B/A TUNER OPTION
CHANNEL VOLUME
MUTING
–
+
–
+
≠
±
1 2 3
1
CD
1 2 3
4 5 6
7 8
+10 0
9
ENTER
D.SKIP
SHUFFLE REPEAT
CONTINUE
CLEAR
POWER
PGM
Using Other Functions
Locking the Controls
— Hold Function
To prevent accidental operation, you can
lock all the buttons with the Hold
function.
+
COMMANDER
OFF
OFF