Sony RM-AV2000 - Manual (Page 24)

24
Example: To program the TV
button
1
While pressing COMMANDER
OFF, press VOLUME – and the
desired Component Select
button.
When the Power-on command is
programmed, you will hear a beep
and “POWER ON” appears on the
display. (The display goes off when
you release the buttons.)
To clear the Power-on command
Repeat the procedure above.
You will hear a beep and the following
display appears.
Notes
• When a signal has been already learned for a
Component Select button (see paga 25), the
Power-on command can not be programmed.
• When you program another signal using the
learning function to a Component Select
button (page 25) for which a Power-on
command has been already programmed, the
learned signal overwrites the Power-on
command. If the learned signal is cleared
afterward, the Power-on command will also
be erased and the button will return to its
status before being programmed.
POWER
ON
POWER
SYSTEM CONTROL COMMANDER
OFF LIGHT
TV VCR1 VCR2 VCR3 DVD DBS/CBL
AMP CD MD/DAT DECK B/A TUNER OPTION
CHANNEL VOLUME
MUTING
–
+
–
+
≠
±
1 2 3
1
LEARN NG
C+C- V+ V-
TV
OFF
RESET
1 2 3
4 5 6
7 8
0
9
ENTER
TV/VIDEO
RECALL P IN P
DISPLAY
POWER
EXECUTE
WIDE SLEEP
MENU
Adding an Extra
Function to the
Component Select
Buttons
Programming the Power-On
Command of the Selected
Component (for Sony
Components only)
When using Sony components, you can
program the Power-on signal for each
component on a Component Select
button. You can select the desired
component and power it on by just
pressing that Component Select button.
COMMANDER
OFF
+ +
TV
VOLUME
–