Sharp AR-C200P - Manual (Page 101)

Sharp AR-C200P: Macintosh OS 8.6-9.2.2 Operation • 101
a. For Duplexing (printing on both sides of the sheet), select
Print on Both Sides .
b. Select which Binding you prefer.
4. Click Print to print or Save Settings to save and close the printer
dialog box.
Collating
Collating can be carried out with or without the optional hard disk
drive (see page 171). However, using the HDD will improve
performance.
If the software application being used has a collate print option, it is
recommended to use only one collate option to prevent any conflicts
in printing, i.e. collate from the software application or collate from the
printer driver.
1. Select your printer.
NOTES
• Duplex printing can only be carried out on standard
paper sizes and paper weights between 20 and 28 lb. (75
and 105 g/m
² ).
• The optional duplex unit must be installed in the printer
and enabled before duplex printing can be carried out.
• Paper must be loaded into the paper tray with the print
side facing upwards. The multi purpose tray cannot be
used for duplex printing.