Problems printing – Sharp AR-C200P User Manual
Page 142
Sharp AR-C200P: Troubleshooting • 142
Problems Printing
Cannot configure for USB connection.
Cannot print.
•
PRNUSBX WRITE ERROR
is displayed.
Possible Cause
Remedy
USB cable does not
meet specifications.
Use USB cable to specification Ver.1.1.
Interface is disabled.
Check that USB interface is set to Enable.
Configuration
procedure was not
correctly followed or
cancelled.
Configure again from the beginning.
USB cable is
disconnected or
faulty.
Reconnect or try another cable.
A USB hub is being
used.
The printer cannot be used with a USB hub. Connect the
printer and computer directly.
Possible Cause
Remedy
Printer is switched OFF.
Switch ON.
Printer interface cable is
disconnected.
Reconnect the printer interface cable.
A converter, buffer,
extension cable or USB
hub is being used.
Test by connecting the printer and computer directly.
Printer driver output port
is incorrect.
Set correct output port to which the printer interface
cable is connected.
Printer is not selected in
the printer driver.
Select the printer or set to default printer.
Incorrect printer driver is
being used.
Delete this printer driver and install correct printer driver.