Sharp AR-C200P - Manual (Page 71)

Sharp AR-C200P: Setting up • 71
Switching Off
In normal circumstances the power save facility should be used to
avoid having to switch the printer off. However if you do wish to
switch the printer off manually, please carry out the following
procedure:
1. Press the MENU button until SHUTDOWN MENU is displayed, then
press the SELECT button.
2. Press the SELECT button again to begin the shutdown
sequence.
3. When PLEASE POWER OFF SHUTDOWN COMPLETED is displayed,
turn the printer off using the power switch.
CAUTION!
• Never turn the printer off while it is printing.
• If the optional hard disk has been installed, the
following procedure must be followed before turning off
to protect any data that is stored on the hard disk.
• It is recommended that you follow this shutdown
procedure each time the printer is switched off for any
reason.
• After switching the printer off, wait at least 10 seconds
before switching it on again. This allows the internal
power levels to drop. Switching on too soon could
cause the printer to malfunction.
Online
Menu Item Value Select
Ready
Attention
Online
Menu Item Value Select
Ready
Attention
Cancel