Sharp AR-C200P - Manual (Page 60)

Sharp AR-C200P: Setting up • 60
Memory Menu
The default settings are bold .
Item Value Description
RECEIVE BUFF
SIZE
AUTO; 0.5 MB; 1
MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB Sets the size of the receive buffer
and depends on the amount of
memory installed in the printer.
RESOURCE
SAVE
AUTO; OFF; 0.5 MB;
1 MB; 2 MB; 4 MB; 8
MB; 16 MB; 32 MB Set the size of the font cache area
and depends on the amount of
memory installed in the printer.
FLASH
INITIALIZE
EXECUTE Initializes flash memory if installed.
PS FLASH
RESIZE
0% [n.n MB] TO 90%
[n.n MB], in 10%
increments Changes the size of the flash
memory area. “n.n” indicates the
actual size in MB.
Note: Special data is stored in the
Flash Memory, therefore you cannot
specify 100%.