Sharp AR-C200P - Manual (Page 98)

Sharp AR-C200P: Macintosh OS 8.6-9.2.2 Operation • 98
3. Press the VALUE button until ALL JOBS or the required job
name is displayed.
4. Press the SELECT button to print the document.
Deleting a stored document from the hard disk drive
1. Press the MENU button to access the
PRINT JOBS MENU
and press the SELECT button.
2. Use the numbered buttons on the control panel to enter the
personal ID number you set above.
3. Press the VALUE button until ALL JOBS or the required job
name is displayed.
4. Press the CANCEL button to delete the remaining copies of
the document.
5. When the deletion confirmation message appears, confirm
by pressing the SELECT button.
Run Maintenance Cycle Before Printing
Selecting Run Maintenance Cycle Before Printing forces the
printer to automatically clean itself before printing. This option allows
you to improve your print quality if there is a problem with printing
such as too much graininess.