Sharp AR-C200P - Manual (Page 57)

Sharp AR-C200P: Setting up • 57
LETTER 0
STYLE
DISABLE; ENABLE Specifies the style that
replaces 9B Hex with letter o
and 9D Hex with a zero
ZERO
CHARACTER
NORMAL; SLASHED Sets the zero to be slashed or
unslashed.
LINE PITCH
6 LPI; 8 LPI Specifies the line spacing
(lines per inch).
WHITE PAGE
SKIP
OFF; ON Change this setting to ON if
you do not wish to print blank
pages
Not available for duplex
printing.
CR FUNCTION
CR; CR+LF Sets functionality on receipt of
CR code.
LF FUNCTION
LF; LF+CR Sets functionality on receipt of
LF code.
LINE LENGTH
80 COLUMN; 136 COLUMN Specifies the number of
columns that will print on a
page (characters per line).
FORM LENGTH
11 inch; 11.7 inch;
12 inch Specifies the length of print
media.
TOF POSITION
0.0 to 1.0 inch in 0.01-inch
increments Specifies the distance of print
from the top edge of the paper.
LEFT MARGIN
0.0 to 1.0 inch in 0.01-inch
increments Specifies the distance of print
from the left hand edge of the
paper.
FIT TO LETTER
DISABLE; ENABLE Sets the printing mode that
can fit print data, equivalent to
11 inches (66 lines), in the
LETTER-size printable area.
TEXT HEIGHT
SAME; DIFF Sets the height of a character.
SAME: Same height
regardless of CPI.
DIFF: Height varies depending
on CPI.
FX Emulation Menu (continued)
The default settings are bold .
Item Value Description