Simrad Autopilot AP26 - Manual (Page 97)

Maintenance
20221586B
95
4.5 Interface Settings
Sets the format of the clock/data output for radars connected to
the Autopilot Computer.
Step to the Interface part of the
Installation Menu.
Turn the course knob clockwise
to access the Interface Setup
items.
Use the course knob to select the
connected type of radar.
Note ! This setting is not available in the AC10 Autopilot Computer.
4.6 Display units
Select Display units by pressing
STBD button and confirm by
rotating the course knob clock-
wise. This screen gives access to
the display unit set-up of the Wind
Speed, Sea temperature and
Depth. The setup is local to each
control unit.
Use the STBD button to select an
item and the course knob to select
the unit.
Available units are:
Wind Speed: Knots (kt) or
meter/second (m/s)
Sea temperature:
Fahrenheit (°F) or Celsius (°C)
Depth: Meter (m) or feet (ft)
Exit the Display units menu by pressing STBD button to proceed
to the Sea trial menu, or press STBY to return to normal
autopilot operation.