Symmetricom S100 - Manual (Page 48)

40 S100 User Guide – Rev. D – June 2005
SyncServer S100
• Host name
• System (S100) location
Confirm the data that is in the fields. If it is not accurate, change it to the correct information.
Click Next.
System Tests dialog
You can skip the test by clicking Finish, or initiate the test by clicking Test Now.
The default is to test all the designated services, so Dialup and E-Mail, unless you un-
check them, will be tested.
To initiate the test, click Test Now.
Figure 3-26: System Testing options