Symmetricom S100 - Manual (Page 52)

44 S100 User Guide – Rev. D – June 2005
SyncServer S100
System Tests dialog
You can skip the test by clicking Finish, or initiate the test by clicking Test Now.
The default is to test all the services, so NTP and E-Mail, unless you un-check them, will be
tested.
Click Test Now.
Test Results dialog
This screen tells you if the NTP time source for your S100 is functioning properly or if there is
a test problem.
Figure 3-31: System Testing options
Figure 3-32: Test Results shown