Sharp DT-500 - Manual (Page 16)

Intr
oduction
15
Remote control sensor (rear)
Remote
control signal
transmitters
Remote control
23n (7 m) 30°
30°
• The signal from the remote control can be reflected off a screen for easy operation. However, the
effective distance of the signal may differ depending on the screen material.
When using the remote control
• Ensure that you do not drop, expose to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. In this case, move the projector
away from the fluorescent lamp.
Usable Range
The remote control can be used to control the projector within the ranges shown in the illustration.
Note
Remote control sensor (front)
Remote
control signal
transmitters
Remote control
23n (7 m) 30°
30°
DT-500_EN_d 06.2.16, 9:57 AM 15