Sharp DT-500 - Manual (Page 31)

30
The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is above the projec-
tor, the projection image can be made
higher by adjusting the projector.
1
2
Remove your hands from the
HEIGHT ADJUST lever of the pro-
jector after its height has been
finely adjusted.
• The angle of projection is adjustable up
to 8 degrees from the surface on which
the projector is placed.
Lift the projector to adjust its
height while lifting the HEIGHT
ADJUST lever.
HEIGHT
ADJUST lever
Make small
adjustments.
3 Adjusting the Height
You can adjust the focus with the focus
ring on the projector.
Image Projection (Continued)
Rotate the focus ring to adjust the fo-
cus while watching the projected image.
Focus ring
Adjusting the Projected Image
You can adjust the screen size using
the zoom ring on the projector.
Rotate the zoom ring to enlarge or
shrink the screen size.
Zoom ring
1 Adjusting the Focus
2 Adjusting the Screen Size
DT-500_EN_h 06.2.16, 10:00 AM 30