Sharp DT-500 - Manual (Page 39)

38
Operating with the Remote Control
Freezing a Moving Image
Press hFREEZE.
• The projected image is frozen.
Press hFREEZE again to return
to the moving image from the cur-
rently connected device.
1
2
Shifting the Projected Im-
age Vertically (Image Shift)
Press PIMAGE SHIFT.
• The image moves up.
Press RIMAGE SHIFT.
• The image moves down.
For easier viewing, this function shifts
the entire image projected on the
screen up or down when projecting 16:9
images from DVD players or other con-
nected devices.
FREEZE button
IRIS button
IMAGE SHIFT
buttons
Switching the Iris Setting
This function controls the quantity of
the projected light and the contrast of
the image.
• The Image Shift function operates when
“Resize” is not set to “DOT BY DOT”.
• For details on Image Shift, see page 47.
Note
Press lIRIS.
• Each time the button is pressed while the dis-
play is on, the mode is switched in the follow-
ing order:
HIGH BRIGHTNESS MODE
HIGH CONTRAST MODE
Selecting the Picture Mode
Press kPICTURE MODE.
• When pressing kPICTURE MODE, the picture
mode changes in the following order:
You can select the appropriate picture
mode to best match the projected im-
age you are watching.
• See page 43 for details on the picture mode.
Note
Standard Dynamic
Movie2 Movie1 Memory
Natural
PICTURE
MODE button
• For details on Iris, see page 45.
Note
DT-500_EN_i 06.2.16, 10:01 AM 38