Color setup, Motion sensor, English – Samsung SHR-1041 User Manual
Page 27: Settings
English
_
●
settings
coLor setup
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <camera>.
Select <coLor setup> and use the direction buttons
($%_+/ENTER) to select a desired item.
If you select an item of which you want to change the
setting, you will see coLor setup screen.
You can adjust all settings from 0 to 100 for each channel in fi ne
tune mode, and the default is 50.
channeL : Select a channel of which you want to set
the color.
Brightness : Adjusts the brightness of the monitor.
contrast : Adjusts the contrast of the monitor.
tint : Adjusts the luminance of the monitor.
coLor : Adjusts the display color of the monitor.
When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.
motion sensor
This menu is enabled only if you have set the motion recording
in “record setup”.
In the <system setup> window, use the left/right
buttons (_+) to select <camera>.
Select <motion sensor> and use the direction buttons
($%_+/ ENTER) to set a desired item.
sensitivity : Set the sensitivity of motion detection.
You can adjust the sensitivity level from 1 to 10.
area : Select an area of motion to detect.
.
.
.
•
•
•
•
•
.
.
.
•
•
CAM1
CAM1
CAM1
CAM1
CAMERA
CAMERA
TITLE
COLOR
SETUP
BRIGHTNESS
APPLY
UNDO
MOTION
SENSOR
1
2
3
4
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
CONTRAST
TINT
COLOR
CAM1
CHANNEL
1
BRIGHTNESS
50
CONTRAST
50
TINT
50
COLOR
50
CAM1
CAM1
CAM1
CAM1
CAMERA
CAMERA
TITLE
COLOR
SETUP
SENSITIVITY
APPLY
UNDO
MOTION
SENSOR
1
2
3
4
5
5
5
5
AREA
AREA
AREA
AREA
02235A_SHR-1041K_ENG.indb 27
2009-02-17 오전 10:50:49