Samsung SHR-1041 - Manual (Page 34)

_ settings
settings
adding a user
user id/password : Enter the user ID and password.
- You can type in up to 14 bytes including spaces for the
password.
group id : Select one from MANAGER and USER
GROUP.
e-maiL : Enter the email address.
- Enter the whole name including the email ID and domain
name.
You can type in up to 36 bytes including spaces for the email
address. Refer to "using virtual Keyboard". (Page 26)
e-maiL notiFication : Turns on or off the notifi cation of an email.
- This is available only if you have set the E-MAIL NOTIFICATION in <event/sensor>.
editing the user
To change the user information, select an applicable item.
You will see the <edit> window.
When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.
system management
You can check the current system version and upgrade it if you want to, back up data or reset the settings.
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <system>.
Select <system management> and use the direction
buttons ($%_+/ENTER) to select and set a desired item.
system inFormation
You can check the current system version and system-related settings.
- ip address : Displays the IP address of the DVR.
- mac address : Displays the DVR’s MAC address.
- disK capacity : Displays the capacity of the HDD.
- F/w version : Displays the fi rmware version.
- h/w version : Displays the hardware version.
- video signaL type : Displays the signal type of the
current video.
- domain name : Displays the domain name of the
appropriate set.
❖
•
•
•
•
❖
.
.
.
•
CAM1 CAM1
CAM1 CAM1
SYSTEM
DATE/TIME
NETWORK
APPLY UNDO
MAIL
USER
MANAGEMENT
SYSTEM
MANAGEMENT
CONTROL
DEVICE
CAM1 CAM1
CAM1 CAM1
OK
IP ADDRESS
MAC ADDRESS
DISK CAPACITY
F/W VERSION
H/W VERSION
VIDEO SIGNAL TYPE
DOMAIN NAME
NET CLIENT PORT
WEB SERVER PORT 127.0.0.0
00:11:5F:00:00:01
250 GB
V1.0
13.23.03.ff
NTSC
f000001.websamsung.net
6100
80
CAM1 CAM1
CAM1 CAM1
SYSTEM
DATE/TIME
NETWORK
APPLY UNDO
MAIL
USER
MANAGEMENT
SYSTEM
MANAGEMENT
CONTROL
DEVICE
SYSTEM INFORMATION
SYSTEM NAME
F/W UPGRADE
FACTORY DEFAULT
SYSTEM DATA
PASSWORD PRESS
SHR-1041
PRESS
PRESS
SAVE
ON
LOAD
CAM1 CAM1
CAM1 CAM1
SYSTEM
DATE/TIME
NETWORK
APPLY UNDO
MAIL
USER
MANAGEMENT
SYSTEM
MANAGEMENT
CONTROL
DEVICE
ADMIN
ADD
ADMIN
ADD
USER ID
PASSWORD
GROUP ID
E-MAIL
E-MAIL NOTIFICATION
MANAGER
OFF
OK CANCEL
CAM1 CAM1
CAM1 CAM1
SYSTEM
DATE/TIME
NETWORK
APPLY UNDO
MAIL
USER
MANAGEMENT
SYSTEM
MANAGEMENT
CONTROL
DEVICE ADD
EDIT
USER ID
PASSWORD
GROUP ID
E-MAIL
E-MAIL NOTIFICATION
MANAGER
OFF
OK CANCEL DELETE
ABC
XXXXXXXX
02235A_SHR-1041K_ENG.indb 34 2009-02-17 오전 10:50:58