Konica Minolta Non-Contact 3D Digitizer Range7 - Manual (Page 16)

14
3) Connecting the AC adaptor
1) Connect the AC cable to the AC adaptor for the RANGE7/5.
2) Insert the AC adaptor plug of the dedicated AC adaptor (AC-A324)
to the AC adaptor connection terminal on the right of the
RANGE7/5 rear panel.
3) Insert the AC cable plug connected to the AC adaptor to a 100 V
AC main outlet.
NOTE Insert the plug securely to the innermost position.
4) Connecting the RANGE7/5 to a PC
1) Insert the Type B plug of the dedicated USB cable to the USB
port on the right of the RANGE7/5 rear panel.
Memo The USB connection port of the RANGE7/5 is equipped
with the plug hold mechanism. First, when the plug is
inserted, it will hit something. Then, you must further
insert the plug securely to the innermost position.
2) Insert the end of the USB cable (Type A plug) into the USB port
of the PC.
NOTE • Insert the plug securely to the innermost position.
• During measurement with the RANGE7/5, or during data
processing after measurement, do not disconnect the USB
cable.