KORG KAOSS PAD KP3 - Manual (Page 15)

16
assigns a control change to each controller.
You can specify note numbers for the
SAMPLE BANK buttons.
GLCH
(Global channel)
SAMPA, B, C, D (Sample Bank buttons)
PAD X, PAD Y, PAD T (Pad Touch)
FX.DP (FX Depth knob)
SLDR (Level/FX RELEASE Slider)
HOLD (HOLD button)
[6] PAD LED
Prog: This turns on/off the function that
displays the program name in the touch
pad LED when a program change occurs.
ILLU:
This specifies the illumination
shown in the pad LED when a certain time
has elapsed since you took your hand off
the touch pad.
“oFF”: Illumination will be off.
“ChAr”: A text string will be scrolled. You
can use the included editor software to
edit this text string.
“TYP.1–8”: Illumination in a variety of pat-
terns will be displayed.
“TYP.C”: Illumination patterns TYP.1
through TYP.8 will be switched automati-
cally.
NOTE Illumination will not operate if Hold is ac-
tive, nor when you're making function settings.
Scrl: Specifies the speed at which the text
will scroll.
This setting determines the speed at which
the pad LED will scroll.
You can choose Slow, Mid, or Fast speeds.
NOTE You can't change the speed of the illumina-
tion display.
[7] USB
You can connect the KP3 to your computer
and read/write the contents of the inserted
card via USB. For details, refer to “Con-
necting a computer.”
[8] EXT.CTRL
This lets you use the KP3 as a MIDI con-
troller. The effects will not function in this
mode.
The KP3 will transmit the MIDI messages
you assigned to each controller using the
included PC editor. For the touch pad, you
can choose from eight different MIDI mes-
sage assign map patterns.
You can assign MIDI messages to the fol-
lowing controllers: PROGRAM/BPM
knob, PROGRAM MEMORY 1–8,
SAMPLE BANK A–D, FX DEPTH, LEVEL
SLIDER, PAD (X, Y, TOUCH), and HOLD.
NOTE Use the SHIFT button to exit EXT.CTRL.