Kenwood XD-A700 - Manual (Page 13)

XD-951/A900/A700 (En)
13
Preparation section
Basic section
Application section
Knowledge sections
Controls and indicators
Receiver
1ON/STANDBY ( POWER) key *
Power ON/OFF switching is executed.
2SOUND key i
Used for the equalizer mode setting, etc.
3EX. BASS (Extra bass) key (
Switches the extra bass play on and off.
4DISPLAY key i
Switches the displayed information.
5INPUT key *
Press to select the input source. When TAPE or CD is selected,
playback starts automatically provided that a tape or disc has already
been loaded.
6MIC 1, MIC 2 jacks (Except for some areas) T
For connection of a microphone (optional).
7MIC VOL. knob (Except for some areas) T
At the time of mic mixing , this knob controls the volumes of the
microphones.
8MODE/DEMO key 4(up
Used for setting or selection of various modes.
The items which can be selected differ according to the status at that
time.
When power is STANDBY: Switches the demonstration on and
off.
9TIMER key YUI
Used for time adjustment, timer setting, etc.
0SET key (
Used for setting of various modes or establishing a selection.
!LISTEN MODE key/Indicator Q
Used for setting the surround modes and sound field effects.
@DISPLAY $
#MULTI CONTROL jog dial &
Used for selection of various modes.
$SRS 3D key/Indicator p
Switches the SRS 3D play on and off.
%ENTER key (
Used for entering a selected mode in memory or executing it.
^DUBBING key ⁄ey
Used for tape dubbing or CD recording onto tape.
&CD PGM key ¤
Used for programming CD tracks.
*VOLUME CONTROL knob *
This is used for volume adjustment.
(Tuner operation keys §¶
TUNING keys
Press to select a radio station.
BAND key
Press to switch the receiving band.
AUTO key
Switches the tuning mode.
)PHONES jack *
For connection of a headphone (optional).
Cassette deck unit
¡A deck cassette holder
Press the area marked 0 0 0 0 0 PUSH OPEN to load or eject a tape.
™DOLBY NR key £
Dolby noise reduction ON/OFF switching is executed.
£REV. MODE key £
The reverse mode of the deck (both sides, repeated, one side) is
switched.
¢B deck cassette holder
Press the area marked 0 0 0 0 0 PUSH OPEN to load or eject a tape.
∞Cassette deck operation keys ™£
Play ( 2 3) keys
Stop ( 7) key
Fast forward and rewind ( 1 ¡) keys
§A/B key ™
Press to select the deck to be operated.
¶REC/ARM key ª⁄
Press to start recording. Pressing the key during recording stops it
after leaving a non-recorded space (blank) of about 4 seconds.
CD player unit
•DISC SELECTOR keys ¡
The disc for playback (or recording) is selected.
ªDISC SKIP key ¡
The disc for playback (or recording) is selected. This is also used for
insertion of a CD to the inside of the disc tray.
ºDisc tray )
Three discs can be stored.
⁄OPEN/CLOSE (0) key )
The disc tray is opened and closed.
¤CD operation keys )¡
Play/pause ( 6) key
Stop ( 7) key
Skip ( 4 ¢) keys