Let’s put out some sound, Basic use method – Kenwood XD-A700 User Manual
Page 18
XD-951/A900/A700 (En)
18
Preparation section
Basic section
Application section
Knowledge sections
Let’s put out some sound
÷ The display part becomes dark when the power
is switched OFF. (DIMMER function)
÷ Quick turning produces a larger change amount.
(AI VOLUME control function)
÷ The display shows a reference value.
The power can also be turned ON by pressing the play key of the CD player, the
play key of the cassette deck or the BAND key of the tuner.
When the ON/STANDBY key is pressed while the power is ON, the power will be
switched OFF.
Basic use method
Muting the sound temporarily
Listening through headphones
÷ When you select the AUX input, be also sure to
read the instruction manual of the component
connected to the AUX input jacks.
(AUX INPUT LEVEL adjustment
u
)
÷ When CD or TAPE is selected, playback will
start when a disc or a tape already has been
inserted into disc tray or deck B.
3. Volume adjustment
2. Selecting the desired output
1. Switching the power ON (OFF)
3
3
1
1
2
2
SET
ENTER
EX.BASS
Bass compensation
Adjust the subwoofer volume level.
Insert the headphone plug into
the PHONES jack.
÷ The sounds from all speakers are
cut off.
ON/STANDBY
1
1
INPUT
2
2
3
3
VOLUME
CONTROL
UP
DOWN
1 TUNER (Radio)
§
2 CD
)
3 TAPE
™
4 AUX (External input)
!