Kenwood XD-A700 - Manual (Page 60)

XD-951/A900/A700 (En)
60
Preparation section
Application section
Knowledge sections
÷ The reservation contents are held in memory.
PROG.1
PROG.2
PROG.1 / 2
PROG. OFF
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
ON / O G O R P
| Scrolled display (PROG. ON/OFF)
Note Note
Timer operation
Adjust the clock before setting the timer.
The reservation contents cannot be cleared. The contents are
cleared only when they are changed.
÷ Also prepare the disc or tape and adjust the listening volume.
When timer operation is not required
To set the same timer program again
Set the POWER switch to OFF (STANDBY) position.
!
Select the program number to be used and press the ENTER key.
0
ENTER
MULTI
CONTROL
ON/STANDBY
1Press the TIMER key.
2Select “PROG. ON/OFF” and press
the SET key.
3Select “PROG. OFF” and press the
ENTER key.
TIMER
ENTER
MULTI
CONTROL
MULTI
CONTROL
SET
PROG.1 .......... Program 1 operates.
PROG.2 .......... Program 2 operates.
PROG.1 / 2 .... Programs 1 and 2 operate.
PROG. OFF .... Timer off.
PROG.1 .......... Program 1 operates.
PROG.2 .......... Program 2 operates.
PROG.1 / 2 .... Programs 1 and 2 operate.
PROG. OFF .... No program operates.
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
ON / O G O R P
1Press the TIMER key.
2Select “PROG. ON/OFF” and press
the SET key.
3Select the program to be set and
press the ENTER key.
TIMER
ENTER
MULTI
CONTROL
MULTI
CONTROL
SET
÷ The selected contents of the timer programming will be displayed in
sequence.
(ON TIME
= OFF TIME = Mode = Input source = Preset channel)
| Scrolled display (PROG. ON/OFF)