Kenwood XD-A700 - Manual (Page 56)

XD-951/A900/A700 (En)
56
Preparation section
Application section
Knowledge sections
1
2Press the ENTER key.
Clock adjustment
Enter the figure of hour.
Select “TIME SET”.
Activate the clock adjustment mode.
This unit incorporates a clock function. Be sure to adjust
the correct time before using the timer function.
The time is displayed only while the power is off.
÷ The time of the day is represented in 12-hour AM/PM method.
÷ Press the SET key. The hour is entered and the minute display starts
to blink.
1
2
3
Example: Adjustment to 8:45
÷ The time display starts to blink.
÷ If you made a mistake, select “RETURN” and press the ENTER key and
restart the entry.
÷ To adjust correct time, press the ENTER key at the same moment as
a time announcement.
÷ The “- - : - -” display appears after a power failure or when the power
cord has been unplugged from the AC outlet and plugged again. In such
a case, adjust the clock again.
1
2Press the SET key.
To increase
the figure
Adjust the clock before setting the timer.
To decrease
the figure
Enter the figure of minute.
4
To increase
the figure To decrease
the figure
TIMER
MULTI
CONTROL
SET
1
2Press the SET key.
MULTI
CONTROL
SET
MULTI
CONTROL
ENTER
00 Ф01Ф02...59ÔRETURNÔ00Ô01...
AM12 ÔAM1ÔAM2...PM1ÔPM2...ÔRETURNÔAM12...
AM 8 0 0
SLEEP
TIME SET
O.T.T.
PROG. ON/OFF
PROG. 1
PROG. 2
AUTO POWER SAVE
AM 12 O 0
CL OC K T E s
AM 8 4 5