Konica Minolta Fax Kit (FX-3) - Manual (Page 127)

6 6.3 Setting Up the Reception
6-38 Fax Kit (FX-3)
Us
ing t
he Ut
ility
Mo
de
(F
ax
)
Ch
apt
er
6
Specifying the Setting for “NO.of RINGS”
1 Select the “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu” on page 6-35.
2 Press the [2] key from the 10-Key
Pad to select “NO.of RINGS”.
3 Using the 10-Key Pad, enter the
desired number of rings, and then
press the [Yes] key.
❍ The number of rings can be set
between 1 and 16.
The “RX OPERATION” menu appears again.
Specifying the Setting for “REDUCTION RX”
1 Select the “RX OPERATION”.
❍ Refer to “Selecting the “RX OPERATION” menu” on page 6-35.
2 Press the [3] key from the 10-Key
Pad to select “REDUCTION RX”.
3 Using the [ ] and [Ö ] keys, select
“ON” (print the document
reduced), “OFF” (split the printout)
or “CUT” (discard any excess),
and then press the [Yes] key.
The “RX OPERATION” menu appears again.
Ц