Konica Minolta Fax Kit (FX-3) - Manual (Page 68)

4.1 Transmission Methods 4
Fax Kit (FX-3) 4-17
F
a
x T
ran
sm
is
si
on
/R
ec
ep
ti
o
n
Me
th
od
s
Ch
apte
r 4
Polling Transmission
Documents scanned and saved in the memory can be retrieved by the recipient.
✎
Note
Polling transmission is compatible with F code transmission.
If the memory is full, polling transmission cannot be set.
With polling transmission, the recipient incurs the cost of the call.
A maximum of 243 recipients can be selected at one time. If recipients are
selected by using one-touch dial keys, a maximum of 27 recipients can be
specified. If recipients are selected by using speed dial numbers, a maximum of
200 recipients can be specified. If fax numbers are being typed in, a maximum
of 16 can be specified.
To set up polling transmission
1 Position the document to be faxed.
2 If necessary, change the “Resolution” setting (p. 3-11).
3 Press the [Function] key.
4 Press the [5] key from the 10-Key
Pad.
or
Press the [Function] key five times
to select “POLLING TX”, and then
press the [Yes] key.
5 Using the [ ] and [Ö ] keys, select
either “SINGLE” or “MULTI”, and
then press the [Yes] key.
❍ To allow only one polling
transmission request, then
delete the document from the memory, select “SINGLE”.
Ц