Konica Minolta Fax Kit (FX-3) - Manual (Page 32)

3.1 Dialing 3
Fax Kit (FX-3) 3-3
Fa
xin
g
Chap
ter
3
5 Press the [Start] key to begin scanning and sending the fax.
To fax using one-touch dialing
If one-touch dial keys have already been programmed with fax numbers, the fax
number of a recipient can be specified by pressing just the corresponding one-
touch dial key.
For details on programming the one-touch dial keys, refer to “Setting Up One-Touch
Dialing (“ONE-TOUCH DIAL” function)” on page 6-4.
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder.
❍ For details on placing the document on the Original Glass, refer to “To fax
documents positioned on the Original Glass” on page 3-13.
3 If necessary, change the “Resolution” setting (p. 3-11).
4 Press the one-touch dial key ([01] through [27]) programmed with the fax
number that you wish to send the fax to.
5 Press the [Start] key.
The machine automatically starts
scanning the document and
sending the fax.
✎
Tip
If the wrong one-touch dial key has
been pressed, press the [Stop]
key, and then press the [Yes] in
the next screen that appears.