Konica Minolta Fax Kit (FX-3) - Manual (Page 33)

3 3.1 Dialing
3-4 Fax Kit (FX-3)
Fa
xin
g
Chap
ter
3
To fax using speed dialing
If speed dial numbers have already been programmed, the fax number of a
recipient can be specified quickly by entering the corresponding speed dial number.
For details on programming speed dial numbers, refer to “Specifying the Setting for
“SPEED DIAL”” on page 6-8.
1 Press the [Fax] key to enter Fax mode.
2 Load the document into the Automatic Document Feeder.
❍ For details on placing the document on the Original Glass, refer to“To fax
documents positioned on the Original Glass” on page 3-13.
3 If necessary, change the “Resolution” setting (p. 3-11).
4 Press the [Speed Dial] key, and
then use the 10-Key Pad to enter
the 3-digit speed dial number.
5 Press the [Start] key.
The machine automatically starts scanning the document and sending the fax.
✎
Tip
If the wrong speed dial number has been pressed, press the [Stop] key, and
then press the [Yes] in the next screen appears.