Kenwood HM-V655MP - Manual (Page 20)

Basic use method
20 EN
Each press of the TIME DISPLAY key changes the
displayed contents.
Time display for the CD-DA and VIDEO CD player (with PBC OFF)
÷ Only time information 1 and 2 can be displayed
during program mode or random playback.
÷ During playback of a VIDEO CD incorporating PBC
with PBC ON and MP3 files, the display can not be
changed.
÷ This unit cannot playback a CD-R or CD-RW disc which has not been finalized.
÷ This unit cannot play other data than audio signal data, such as data signal in a CD-ROM. When a disc containing
various data, for example a CD Graphic or CD-TEXT is loaded in the unit, the unit cannot play other data than the
audio signal data.
Notes on playback of CD-R and CD-RW
This unit cannot playback the following types of CD-R and CD-RW discs.
In addition to the above, this unit may also be incapable of playing certain CD-R or CD-RW discs depending on the
recording characteristics of recording equipment (including the pickup), properties of the CD-R or CD-RW in use, its
recording condition and so on.
Playback of CD-DA, MP3 file and the audio of VIDEO CD
TIME DISPLAY
Remote control unit only
1 Elapsed time of track being played
2 Remaining time of track being played
("REMAIN" lights up)
3 Remaining time on entire disc
("TOTAL REMAIN" lights up)
÷ When playback a CD-EXTRA disc, the display shows "CD-DA" or "VCD" depending on the format of the disc.
÷ Some CD-EXTRA discs can not be played depending on the format of the disc, the display shows "NO DISC".
÷ When "VCD" is displayed, only audio signal will be produced.
Notes on playback of CD-EXTRA
This playback only output audio signal.
5281/16-20/EN 6/20/02, 3:45 PM 20