Kenwood HM-V655MP - Manual (Page 50)

Timer operation
50 EN
÷ When the timer setting is completed by pressing
the set/demo key, "COMPLETE" is displayed.
÷ When the timer setting is completed by pressing
the set/demo key, "COMPLETE" is displayed.
4
Select the broadcast station (only when
TUNER is selected above).
(1) Select the preset station No.
(2) Set it.
4
Select the broadcast station (only when
TUNER is selected above).
(1) Select the preset station No.
(2) Set it.
Put the unit in standby mode.
7
÷ When the unit enters the Standby mode, the standby/
timer indicator lights in green.
÷ If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the standby/timer indicator blinks in green. In this
case, the clock setting should be restarted from the be-
ginning.
To check or modify the reservation contents, restart the timer reservation from the beginning.
5281/44-50/EN 6/18/02, 1:02 PM 50