Kenwood HM-V655MP User Manual

Page 55

Advertising
background image

In case of difficulty

55

EN

Displayed messages and actions to be taken against them

Meaning

Displayed Message

ERROR

÷ The disc is abnormal (causing a trouble such as impossibility of reading). Replace it

with a normal disc.

NO DISC

÷ No disc is loaded.

÷ The loaded CD-R or CD-RW disc has not been finalized.

NOT AUDIO

÷ The disc or the signal recoded in it is incompatible with this unit. This is not malfunc-

tion of this unit.

PGM FULL

÷ An attempt is made to select a 33rd track during programing of CD.

PGM MODE

÷ An attempt is made to start random playback in the program mode. Exit from the

program mode before random playback.

º

PROTECT

÷ The cassette in use is protected by breaking the erasure protection tab.

W

RDM MODE

÷ An attempt is made to perform O.T.E. recording while the unit is in the CD random play

mode. Exit from the random play mode.

¤

UNKNOWN

÷ The disc is of the type that cannot be played back with this unit.

÷ The disc does not contain MP3 files. Replace it with a disc containing files that can be

played back with this unit.

Cassette deck section

÷ Clean the head referring to "Maintenance".

Q

÷ The tape is wound too tight due to irregular winding.

÷ Play a recorded tape.

÷ Press operation keys in more than a few seconds after closing the

cassette holder.

¡

÷ Change the tape transport direction or reverse the tape insertion

orientation.

¡

÷ Press in stop mode.

÷ Clean the head referring to "Maintenance".

Q

÷ Try another tape.

÷ The recording level is not set properly (when the AUX input is

recorded).
Adjust the AUX input level.

r

÷ Demagnetize the head referring to "Maintenance".

Q

÷ Install the system at a distance from other electric appliances and TV.

÷ Set the TAPE EQ. to on.

÷ Clean the head referring to "Maintenance".

Q

÷ Wind the tape again by fast forwarding, rewinding or playing from

an end to the other.

¡™

÷ Use a cassette with an unbroken recording protect tab or block

the hole.

W

÷ Close the holder completely.

¡

÷ Set the input selector to the source to be recorded.

÷ Change the tape transport direction or reverse the tape insertion

orientation.

¡

Remedy

Symptom

Sound cannot be produced by pressing the
play key.

No operation occurs even when an operation
key is pressed.

The cassette holder cannot be opened by
pressing "

) push open".

Sound is harsh or high frequencies are not re-
produced.

Sound is distorted.

Noise is noticeable.

Sound vibrates.

Recording cannot be started by pressing the
record key.

5281/51-56/EN

6/17/02, 4:43 PM

55

Advertising