Kenwood HM-V655MP - Manual (Page 47)

Timer operation
47 EN
Setting the timer program
(PROG. TIMER)
In each of PROG 1 and PROG 2, the timer data including the operating period and played contents can be
program and set to be activated or deactivated.
A non-finalized CD-R or CD-RW cannot be played back.
÷ Two timer settings can be reserved independently in two programs PROG 1 and PROG 2.
÷ Please make reservations with an interval of at least one minute, so that the operation times of PROG 1 and PROG 2 do
not overlap.
Make preparations for the play (recording).
Set the timer setting program number.
Each press switches the display contents.
1 "PROG 1 ?"
2 "PROG 2 ?"
÷ The previously set contents are displayed. (If you do not
want to change them, simply press the set/demo key.)
÷ When a timer setting has already been made in the se-
lected timer, the setting will be overwritten by the new
setting.
1
Select "TIMER ?".
2
Select "PROG 1 ?" or "PROG 2 ?".
3
Set it.
(Press the set/demo key while the "?" mark is
blinking.)
Adjust the clock before setting the timer t
Connect the related equipment under reference to "System connection" 6 ~ 8
1
2
Playing the auxiliary input source To listen to radio
To listen to CD
Insert a disc. (CD-DA only)
(Program playback is not possi-
ble.) Insert a tape.
To listen to tape
Make timer setting of the compo-
nent connected to the AUX input
jacks.
For recording
Make preparations for record-
ing.
§ ~ •
\ \ \ \
Each press switches the display contents.
"TAPE RVS"
"AUTO PRESET ?"
(Only when the TUNER input is selected)
"INPUT ?"
(Only when the AUX input is selected)
"TIMER ?"
"TIME ADJUST ?"
"APS ?"
The station should be preset
prior.
¢
Continued on next page
5281/44-50/EN 6/18/02, 1:01 PM 47