Kenwood HM-353V - Manual (Page 11)

11
Preparation section
Turning the knob switches the display contents.
"T A P E R V S . ? " ™
"AUTO PRESET" ¢
(Only when the TUNER input is selected)
"A U X I N P U T ? " e
(Only when the AUX input is selected)
"A . P . S . S E T ? " 9
"T I M E R S E T ? " yi
After pressing the menu key to select the menu se-
lect mode, turn the volume/multi control knob to
select the desired menu item.
To set or enter the setting of the menu item, press
the set/demo key.
* About the volume/multi control knob (Main unit operation only)
6
set/demo key
Press to set or enter an item selected with the vol-
ume/multi control knob.
This key is also used for switching demonstration on/
off. 4
7
Cassette holder ¡
To load or eject a cassette tape, press the area marked
0 push open on the cassette holder to open it.
8
menu key !r
Press to switch the function of the volume/multi
control knob to the menu select mode.
This key is also used when setting the time of the day.
9
TAPE EQ. key ™
Press to turn the tape equalizer on.
0
Disc tray *
Press the 0 CD key to open or close disc tray.
!
Basic operation keys
TUNER FM/AM key
£
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD
6 key *
Press to select the CD input and start playback. Press-
ing this key during CD-DA, VIDEO CD and MP3 file
playback initiates pause.
During VIDEO CD (with PBC ON) and MP3 file operat-
ing, press to advance to the lower layer of the hierar-
chy.
TAPE
2 3 keys ¡
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
AUX key e
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
Pressing this key while the unit is off turns it on at the
same time as selecting the AUX input.
@
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red : Ordinary standby.
Green : Timer standby.
Off : The unit is On.
#
key ^
Press to set the unit to On or Standby.
$
sound key &
Press to switch the sound effect to EX.BASS or
LOUD.
%
repeat key º
Press for setting repeated playback.
^
TAPE rec key ¶
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
&
TAPE O.T.E. key ‹
Press to start recording CD-DA and VIDEO CD (with
PBC OFF) onto a tape with one-touch operation.
Pressing this key during CD-DA and VIDEO CD (with
PBC OFF) playback records only the track being played
onto tape. Pressing it during CD-DA and VIDEO CD
(with PBC OFF) stop records all tracks onto tape.
*
Headphone jack &
Connect headphones with a stereo mini-plug (option-
ally available).
÷ The function of the control knob returns to the normal mode when it has not been operated for 20 seconds.
Standby mode
While the standby indicator is lit, a small amount of power in supplied to the system to back up the
memory. This is called standby mode. Under the condition, the system can be turned ON by the remote
control unit.
Controls and indicators
volume / multi control
\ \ \ \
menu set / demo