Kenwood HM-353V - Manual (Page 8)

8
Preparation section
AUX
OUTPUT
DIGITAL OUT OPTICAL
AUX
INPUT
VIDEO
OUT
L
R
L
R
ANTENNA
AM
GND
FM
75
Ω
AM
GND
FM
75
Ω
ANTENNA
+
-
L
-
+
R
FRONT
SPEAKERS
(6-16 Ω )
DIGITAL OUT OPTICAL
AC 110-
120V
AC 220- 240V
÷ In case an associated system component is connected, also read the instruction manual of the component.
÷ Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be
produced or noise may interfere.
÷ Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If
connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.
Connection of Other Accessories
(Commercially Available Parts)
Lead the 75
Ω
coaxial cable connected to the FM out-
door antenna into the room and connect it to the
FM 75
Ω
terminal. Please remove the indoor an-
tenna after an outdoor antenna has been installed.
Connect the components as shown in the dia-
gram. Only plug the power cord into a power
outlet once connections are completed.
CAUTION
Note on Connection
To
audio
input
VCR, Analog turntable with built-in
RIAA equalizer (optional P-110), etc.
POWER cord
TO WALL AC OUTLET
Antenna adaptor
(Commercially
Available Parts)
FM outdoor antenna
FM outdoor antenna
* DIGITAL OUT OPTICAL jack
cap
Optical fiber cable
The DIGITAL OUT OPTICAL jack outputs the CD sig-
nal.
The CD signal can be recorded in digital format by
connecting a recorder to the DIGITAL IN OPTICAL
jack.
MD recorder or DAT etc.
To Digital input
System connection
To
audio
output
Monitor TV
*
Notes Notes
To
video
input