Kenwood HM-353V - Manual (Page 40)

40
Application section
Playback of VIDEO CD
To jump to a specific location of the track being
played, specify the time of that location.
Time search function
÷ Stop VIDEO CD menu playback if in progress.
÷ Cancel "PGM" in advance.
1 Play the desired track and press the TIME
SEARCH key.
2 When "Go to – –:– –" is displayed, specify the
time.
Press the numeric key as shown below....
To specify 3 minutes 30 seconds:
)33)
To specify 15 minutes 25 seconds:
1525
÷ When key input is completed, playback starts at the
disc position specified by the time.
Resume function
÷ Cancel "PGM” in advance.
÷ When the input selection or disc is changed or the
power is turned off, memory is cleared and the
resume function becomes invalid.
1 Stop playback.
2 Press the RESUME key.
If the "PBC" indicator is not lit, press the 7 STOP key
once.
If the "PBC" indicator is lit, keep the
7 STOP key de-
pressed for more than 2 seconds.
"PBC" is deactivated when you press the
7 STOP key
during PBC menu playback.
The resume function may not precisely work after
stopping playback of a VIDEO CD with PBC.
To resume playback from the location where play-
back was last stopped, press the RESUME key.
TIME
SEARCH
STOP
RETURN
RESUME
9
6
3
0
8
5
2
7
4
1